Loctite Super Glue Ultra Gel Control, Clear Superglue, Cyanoacrylate Adhesive Instant Glue, 0.14 fl oz Bottle Review (2026)

What this glue is

Loctite Super Glue Ultra Gel Control is a cyanoacrylate, or CA, adhesive in gel form, sold in a 0.14 fl oz bottle with what Loctite describes as a patented side-squeeze design for maximum control and precise, drip-free application. Squeezing the sides of the bottle rather than the top is meant to give finer control over how much glue comes out at once, which matters with a fast-setting adhesive where excess glue is hard to correct after the fact. Loctite markets this specific formula as its most durable, built to be rubber-toughened for extra resilience compared with a standard thin CA glue, and it dries clear so a small excess bead is less visible on a finished model.

Bond strength and cure time

Loctite states this formula sets quickly and reaches a full cure within 12 to 24 hours, with the rubber-toughened chemistry giving more working time to align parts before the glue fully grabs compared with some standard super glues. Once cured, the bond is described as resistant to water, impact, shock, and vibration, and safe for outdoor use, properties aimed at joints that will see repeated handling or knocks rather than sitting untouched on a shelf. For miniature painters and gamers, that resistance to shock and vibration is relevant for models that get transported to games or handled often during play, where a brittle bond might otherwise snap at a thin joint like an arm or weapon.

What it bonds well

Loctite lists this adhesive as effective on leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber, and hard plastics such as acrylic, polycarbonate, polystyrene, and PVC, a broad range that covers most of the materials used in resin and metal miniature kits along with many plastic model parts. The gel form is well suited to vertical or awkward joints like an arm meeting a shoulder or a banner pole, since it stays where it is placed rather than running down the part the way a thin liquid CA can on an uneven surface.

Where it falls short

Loctite explicitly states this formula is not recommended for polyethylene, polypropylene, PTFE, silicone, foam rubber, polystyrene foams, glass, very soft leathers, or bone china, so builders working with those specific materials need a different adhesive. The gel consistency, while useful for control, also sets a little slower to full grab than a thin liquid CA glue, meaning parts may need to be held in place slightly longer during assembly. At 0.14 fl oz, the bottle is small, so builders working through a large batch of resin or metal miniatures may go through more than one bottle over a big project, especially compared with buying CA glue in bulk from a hobby-specific brand.

Bottom line

This is a well-controlled, durable cyanoacrylate gel suited to gluing resin, metal, and hard plastic miniature parts where precise placement and a shock-resistant bond matter, such as models that get transported or handled during games. The side-squeeze bottle design reduces the mess and overflow common with standard CA glue bottles, at the cost of a small overall volume that may need replacing sooner on larger projects. For general miniature assembly across common hobby materials, it is a dependable, controllable choice, provided the project does not involve the specific materials Loctite excludes.

Frequently asked questions