The Army Painter Miniature & Model Magnetic Pieces, 20 Pieces with 5mm Magnets, 80 Pieces with 3mm Magnets for Wargaming and Model Basing Review (2026)

Two sizes in one pack

This set combines twenty magnets at 5 millimeters in diameter with eighty magnets at 3 millimeters in diameter, all 1 millimeter thick, according to The Army Painter's own product listing. Splitting the pack across two sizes covers more use cases than a single-size pack would, since the larger 5 millimeter magnets suit sturdier applications like securing a model into a display case or magnetizing a removable base, while the smaller 3 millimeter magnets are closer to the standard size used for swapping weapons or small accessories on plastic and resin miniatures. Having both sizes on hand from one purchase saves buying two separate packs for these different jobs.

N52 grade material

The Army Painter markets these as supercharged rare-earth magnets made from high-grade N52 neodymium, which is the strongest commonly available commercial neodymium grade and is a reasonable standard for a hobby brand to use given how much smaller these magnets are compared to industrial magnet sizes. Using the strongest available grade at this thickness helps the magnets hold reasonably well despite their small size, which matters most for the 3 millimeter magnets used on lighter accessory swaps where every bit of holding strength helps keep a small weapon or shield securely in place during handling and transport.

Installation basics

The Army Painter's guidance describes drilling a shallow hole, roughly a millimeter deep to match the magnet thickness, applying super glue, and placing the magnet with tweezers while checking that the polarity lines up correctly between the two halves of a joint, such as a weapon and its attachment point on an arm. Getting polarity right matters because two magnets with mismatched poles will repel rather than attract, which is an easy mistake to make with magnets this small since the poles are not visually marked and have to be tested by hand before gluing. A basic hobby drill and a fine bit sized to the magnet diameter are needed alongside this pack to actually install the magnets, since neither is included.

Total magnet count versus bulk packs

This pack totals 100 magnets across both sizes combined, which is smaller in raw count than some generic bulk neodymium magnet packs sold in quantities of 250, 500 or more at a similar or lower price per magnet. Buyers whose main goal is magnetizing a very large army or collection, where hundreds of magnets are needed across many models, may get better value from a bulk generic pack in a single size matched to their most common use case. This Army Painter pack is better suited to a hobbyist working through a smaller or mixed collection who wants both size options ready without ordering multiple bulk packs separately.

A hobby-branded convenience pack

Buying from a recognized hobby brand like The Army Painter, rather than a generic magnet supplier, can offer some peace of mind around consistent sizing and grade labeling, since hobby brands typically test their products specifically against miniature and wargaming use cases before selling them under their own name. The trade off is a higher price per magnet compared to buying loose neodymium magnets from an industrial magnet supplier in bulk, where the same N52 grade and similar sizes are often available for less per unit once quantity increases. For someone who values convenience and a pack sized specifically around common miniature magnetizing tasks over squeezing out the lowest possible price per magnet, this pack fills that role reasonably well.

Frequently asked questions