Gorilla Super Glue Gel, Clear Glue, 20 Gram (Pack of 2) - All Purpose and Fast Setting Review (2026)

Gel formula and no-run control

Gorilla's gel formula is thicker than standard liquid super glue, which the manufacturer states gives it no-run control that makes it easier to apply on vertical or angled surfaces without the glue dripping before it sets. For hobby and miniature use, this matters most when gluing upright parts, such as attaching an arm or accessory to a standing figure, where a thin liquid glue would tend to run down the model before curing. The trade off is that a gel sits on the surface rather than wicking into a tight seam the way thinner cyanoacrylate glues do, so it is better suited to butt joints and general bonding than to invisible seam work on display kits.

Set time and cure time

According to the manufacturer's product listing, this glue dries in 10 to 45 seconds, with a full cure reached after 24 hours. That initial set window is fast enough to hold small parts in place with light finger pressure for most hobby gluing tasks, though a full 24 hour wait before handling a bonded joint under stress is worth planning for on parts that will see repeated movement, such as a magnetized or pinned weapon swap. The anti-clog cap referenced in the product description is meant to keep the tube's tip from drying shut between uses, which is a common failure point with cyanoacrylate glues left unused for weeks between projects.

What it bonds and what to avoid

Gorilla states this glue bonds plastic, wood, metal, ceramic, rubber, leather and paper, which covers the vast majority of materials used in model kits, miniatures and diorama bases, including resin components in most cases since resin behaves similarly to hard plastic for adhesive purposes. The manufacturer also notes it is not recommended for polyethylene or polypropylene plastic, which are the same low surface energy plastics that resist most other adhesives too, so this is not a limitation specific to Gorilla's formula. Builders working with those particular plastics, sometimes found in certain toy or prototype parts, should look at a plastic-specific cement or check compatibility before relying on this glue for that material.

Two tubes for the price of stocking one

This listing is a two pack of 20 gram tubes rather than a single bottle, which is a practical advantage for anyone who has experienced a super glue tube drying out or clogging before the contents are used up. Having a second sealed tube on hand as a backup means a hobbyist is not left without glue mid-project if the first tube fails early, which is a common complaint with cyanoacrylate adhesives in general due to their sensitivity to air exposure. For someone who glues occasionally rather than constantly, splitting use between two smaller tubes over time can also mean less wasted product compared to opening one large tube that dries out before it is finished.

Precision on small hobby parts

Because this is a general purpose adhesive rather than a hobby-specific applicator, the nozzle is not designed with the same fine precision tips sold alongside dedicated hobby cyanoacrylate glues, and the gel's thicker consistency can make it harder to apply a truly minimal dot on very small miniature parts. Builders gluing fine components, such as tiny weapon accessories or thin antennae, may want to dispense a small amount onto a scrap surface first and apply it with a toothpick or fine tool rather than straight from the tube, to avoid visible excess glue squeezing out around a small joint. This extra step is a minor workaround rather than a serious flaw, but it is worth planning for compared to glue bottles built with narrow precision tips from the start.

Frequently asked questions